Motorcycle Rear Axle plate fixture 100% Made in USA!!!!

Description

Brand new release only from mmwfabs.com!!!!
The culmination of  years of trying all the other fixtures on the market and what we felt our customers would want in an axle plate fixture.
We took the rule book and threw it out!
This fixture is completely CAD designed and CNC laser cut from 100% US sourced 1/4 mild steel cold rolled P&O plate.
We then tumble debur and shot blast the side plates so they are smooth as silk.
High quality Powdercoated gloss black finish for the best possible welding spatter rejection.
Then we Added indexing notches at the rear of fixture for locating axle height making it a snap!
There are 2 sets of holes for axle fixtures.
1 set of fixed holes, and 1 set of slotted
to accommodate any size axle plate
Our full line of axle plates will be released before
Christmas 2020
This Fixture will work with 2x3 or 2x4 tubing
and will also work with our
2x3 and 2x4 fixture towers that
we will be releasing early 2021
Included with your purchase-
2- Steel powdercoated side plates
All 1/2" hardware to mount and use your neck fixture
Fixture Rods and spacers are sold separately or
can be added in the drop down menu in either
5/8"
- will work for 17mm axles also
3/4" - will work for 20mm axles also
1.00"
- will work for 25mm axles also
All axle rod and spacer kits come with
Full 16.00" long
zinc plated steel fixture rod to
accommodate the largest size tire / wheel
2.00" spacer for between your fixture plates
And 2- 12.00" 1/8" wall steel DOM tubes
to cut to length for your correct axle spacing