Automatic Sewage Pump w/ Wide Angle Float Switch, 10' cord, 4/10 HP, 115V

Description

Overview:
The Liberty Pump LE41A
is an automatic submersible sewage pump with a 4/10, 115V motor and a 10' quick-disconnect power cord. This Liberty sewage pump is equipped with an adjustable wide-angle switch that has a series (piggyback) plug for a manual bypass operation. In the event of switch failure, the submersible sewage pump cord can be separated and plugged into the electrical outlet, directly bypassing the switch. The turn-on level for this submersible sewage pump is approximately 12" to 16" above the bottom of the basin. The turn off level is approximately 6" above the bottom of the basin.
The Liberty Pump LE41A has a shut-off head of 19' and a discharge of 2" FNPT. It can handle solids up to 2" and temperatures up to 140F. The Liberty sewage pump motor is oil filled and thermally protected. The rotor shaft is made of 416-stainless steel and is supported by lower and upper ball bearings.
Features:
Heavy cast iron construction
Oil filled, thermally protected motor
Permanently lubricated ball bearings
Corrosion resistant, vortex style impeller made of high temperature engineering polymer
All stainless steel fasteners and rotor shaft
Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor
Technical Specifications:
Horsepower: 4/10HP
Cord length: 10'
Discharge: 2" FNPT
Solids Handling: up to 2"
Shut-off Head: 19'
Voltage: 115V
Amps: 12
Hertz: 60 Hz
Phase: 1
Maximum fluid temperature: 140°F
Height: 14"
Width: 10.75"
Weight: 40 lbs.
Minimum basin diameter: 18"
Minimum basin depth: 24"