-40%
4LE11 1/2 HP Submersible Effluent Pump 230V 2

4LE11 1/2 HP Submersible Effluent Pump 230V 2" NPT Discharge Cast Iron

$ 246.61

Availability: 100 in stock
  • Item: Submersible Effluent Pump
  • Top Material: Cast Iron
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Phase: 1
  • Motor RPM: 3450
  • Height: 17-5/16"
  • HP: 1/2
  • Cord Length: 20"
  • All returns accepted: Returns Accepted
  • Base Material: Cast Iron
  • Bearing Type: Ball
  • GPM of Water @ 10 Ft. of Head: 92
  • GPM of Water @ 30 Ft. of Head: 53
  • Motor Type: Oil Filled PSC
  • Condition: Open box. Packaging in distressed condition, pump unaffected.
  • GPM of Water @ 20 Ft. of Head: 76
  • GPM of Water @ 15 Ft. of Head: 84
  • Impeller Material: Polypropylene
  • Return shipping will be paid by: Seller
  • MPN: 4LE11
  • GPM of Water @ 25 Ft. of Head: 65
  • Shaft Seal: Silicon Carbide
  • GPM of Water @ 5 Ft. of Head: 96
  • Duty: Intermittent
  • Housing Material: Cast Iron
  • Switch Type: None
  • GPM of Water @ 40 Ft. of Head: 20
  • Item must be returned within: 30 Days
  • Brand: DAYTON

    Description

    Submersible Effluent Pump
    SPECS
    Dayton submersible ejectors are self-contained and recommended for use in a sump or basin, where they should be vented in accordance with local plumbing codes. They are designed to pump effluent or wastewater, nonexplosive and noncorrosive liquids, and shall not be installed in locations classified as hazardous in accordance with the United Stated Electrical Code (NEC), ANSI/NFPA 70. Never install the pump in a trench, ditch, or hole with a dirt bottom; the legs will sink into the dirt and suction will become plugged.